스테인리스 스틸 층류 공기 흐름 시스템, 원료용 샘플링 부스

Stainless steel sampling booth with vertical laminar air flow for cleanroom

1. Sampling booth description:

Sampling booth is suitable for the sampling of raw and auxiliary materials except pharmaceutical preparations and sterile preparations.

It is widely used in the sampling of raw and auxiliary materials for special occasions such as medicine, preparations, electronics, precision instruments, meters, and foods. According to the requirements of GMP standard, the sampling car produced by our factory reaches 10,000 grades of cleanliness, and the electrical components used at the same time comply with GB1497-85 (electrical safety standards); in line with the provisions of GB-191 (packaging standards)

The electrical control panel of the clean sampling vehicle is a computer light contact control, the fan is stepless speed regulation, the air volume is arbitrarily adjusted, and the clean sample vehicle configuration is equipped with ultraviolet sterilizing lamps. Other specification sizes can be customized according to customer requirements or installed with soft curtains at both ends.

2. Sampling booth features:

1).The clean sampling vehicle is a vertical-flow local air purification device. Since the indoor air is filtered through the initial effect, the form of the air from the high-efficiency air filter reaches a high-clean working environment.

2).The clean sampling vehicle is designed and manufactured according to the GMP standard, and the cleanliness can meet the requirements of class 100-10000. It is suitable for use in dust-free environment and is often used for the sampling of raw materials of medicinal preparations (excluding sterile preparations).

3).The main components such as the centrifugal fan used in this sample booth meet the requirements of GB1497-87 (motor safety standard). The product structure consists of stainless steel plates or spray-coated steel plates, respectively

3. Sampling booth Application method:

1).깨끗한 샘플링 차량은 샘플링이 필요한 곳으로 이동하고, 샘플링 차량(브레이크)은 고정합니다.

2). 전원을 켜고 전원 스위치를 켜고 팬 스위치를 켜고 팬이 작동하기 시작하고 전압을 적절한 전압(보통 220V)으로 조정한 다음 깨끗한 샘플링 차량이 15분 동안 작동한 후 샘플링 배럴을 넣습니다.

3). 샘플링이 완료되면 샘플링 버킷을 제거하고 팬과 전원 공급 장치를 끄고 전원 코드를 뽑은 다음 샘플링 차량을 원래 위치로 이동합니다.

참고: 사용 조건에 따라 풍속계를 사용하여 작업 공간의 풍속을 정기적으로 측정해야 합니다. 기술 요구 사항이 충족되지 않는 것으로 확인되면 팬의 풍량을 조정할 수 있습니다. 필요한 경우 고효율 또는 일차 효율 에어 필터를 교체하세요.