Ламинарные вытяжные шкафы класса 100 для чистых помещений, ламинарные вытяжные шкафы GMP

1. GMP Laminar air flow hood description

According to the GMP (1998 revision) requirements, the current general pharmaceutical manufacturing plant is divided into 300,000, 100,000, 10,000, and 100, depending on the type of production. A clean grade, the 100th grade is the highest cleanliness level.

In a dust-free workshop of a pharmaceutical production plant, there will often be local 100-level areas, or require a certain room or several rooms to be class 100, or require certain areas in a room to be class 100. These 100 class areas are generally not large. , ranging from tens of square meters to a few square meters and even a fraction of square meters, is usually part of a process assembly line within a clean room. The Class 100 area is generally located in the inner area of the workshop, surrounded by 10,000 class or 100,000 class areas. The Class 100 area is part of the assembly line of the workshop. The entire assembly line also includes Class 10,000 or class 100,000. The 100-level area is generally lower in floor height (≤2.8m) and the environment is closed. It requires high noise and requires ≤65dB.

2.GMP Laminar air flow hood advantages

1). Purpose: The clean laminar flow hood is an air purification unit that can provide a local high clean environment and can be flexibly installed above the process requiring high cleanliness. Clean laminar flow hoods can be used individually or as multiple strips of clean areas. The device is a unidirectional flow purification device with top, side or bottom air inlet and bottom air supply, which can be widely used in electronics, pharmaceuticals, precision instruments, scientific research and other fields.

2). Principle: The clean laminar flow hood blows the pre-filtered air into the static pressure box with a certain wind speed, and then the hepa filter equalizes the pressure of the damping layer, so that the clean air flows vertically into the working area. , thus ensuring the cleanliness of the work area to achieve the process requirements.

3). Structure: There are three kinds of clean laminar flow hood with fan installed, fan installed above and fan installed. Mounting methods are suspended, floor stand and mobile. The structure can be divided into wall plate type, full iron shell paint, stainless steel outer shell iron and stainless steel and other forms.

3. Laminar air flow ceiling Parameter